(c) 2016 Teejay Riedl

The Hydrotron
Image 1
The Hydrotron appears to have been designed to purify water while extracting ionization energy. Water is pumped into storage vessels and when beams of planar energy intersect the vessels, the water is excited into a bi-ionization state.

The precise nature of the ionization state cannot be determined from this diagram, although the spectrographic illustration maps directly to the planar energy pulse. It appears as if certain resonant frequencies in the pulse directly-correspond to spectral locations. The diagram beneath the spectrograph display is, without a doubt, a representation of the Lyman Series of atomic transitions, which infers that the series is mapped to Hydrogen. However, the spectrum itself cannot represent hydrogen, but some other element. Based on data presented in Figure 2, we infer the source element being recovered from the water to be a transactinide, most probably eka-radon (Ununoctium).

 

As such, it seems that the reason for supporting the containment vessels at such a height is to provide both propagation space for the planar energy beams, and to provide physical separation between the beam loci.

The upper structure exists primarily as a support for the vessels, providing the main load-bearing element for the assembly. By estimating the specific weights of the apparent components, it appears that a brace / cantilever methodology is sufficient to support the containment vessels, and although the structure is illustrated in plan view, it seems likely that there were either four or six total containment vessels (which would project into the Z-axis of the drawings). This would provide both structural and aesthetic balance to the structure.

The facility is located next to a body of water of some non-trivial size (seen at left) which provides the source for the extraction process. Although the discharge flues are visible in this diagram, the uplift apparatus is not visible, except for the delivery pipes. Because having both intake and outflow systems in close proximity would not be effective, we assume the intake sources are not shown, and are probably distant from the source itself Evidently, the charged water is released from the tanks, and additional energy is recovered via a turbine which in turn drives a generator via an axial connecting shaft.

Because of the Duranium vessels, Higgs energy is also extracted from the quantum vacuum. According to our best interpretation of the mathematics, when the electrons in the molecule return to their ground state, the net energy yield is greater than the input. This clearly violates many of the accepted laws of Physics and Thermodynamics, and our interpretation of the text and mathematics is thus still under review.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(c) 2016 Teejay Riedl
The second Hydrotron image shows a detail of one of the beam generators.

At bottom is another of the geothermal energy extractors. The circular units at extreme lower right are the power inputs fom what we assume to be an energy input mechanism simikar to that used in the Bellari Shield. Energy is then modulated by 3 controllers (seen directly beneath the spiral staircase), and channeled toward the beam projector at center top. By acquiring three of the resonant magnetic frequencies, Kerr input from the modulators excite the beams to operating power levels.

While the chemical composition of each of these cells is not evident in the data made available via the diagram, each cell is responsible for generating a unique, non-continuous frequency range. The beams are combined by focusing lenses, and reflected off a Ununbium (Uub 112) coated mirror within a heavily-shielded cryogenic chamber.

Image 2
Diffraction gratings etched into the mirror cause the beams to diverge once again, where they are passed though a mist of liquid Dynubium (the vertical path of the beams) and again refocused by a chilled lens. (This lens is seen as the concave shape just above the structural flooring just to the left of center in the diagram).

The refractory indices of the mist and lens cause a polarization and intensity boost. The beams are then recombined into the beam projectors, where they are focused on the Duranium vessels.

Prominently-figured at top right in the diagram is what appears to be the manufacturing methodology of isolating the Unubium – a fact of which the Kelans seem proud. Justifiably so, indeed – the element exists terrestrially in only trace amounts of several atoms at any given time. The equation seems to translate as:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image three shows the upper levels of the Hydrotron.

Additional higher floors evidently serve double duty as accommodations for administrative staff, and control rooms for the pumping mechanisms to serve the water vessels.

As in all Kelan illustrations, a FMU Triad is seen in scale, standing in the control room. We note this here for two reasons:
• The triad is seen in relative close-up as compared with other Kelan images, so the triangle notation may be clearly- seen
• The context of the Triad seen here implies that all three members of a Triad performed “work” functions.
A treatment of the Cultural implication sof the Triad will appear elsewhere in this report.

The graph at top right describes the spectrum analysis of the energy state of the planar beams during operation of the system. That the beams were modulated is clear by the multiplicity of node and energy data points seen in the graph. These spectra are then summarized in the pie chart below.

Image 2

 

 

 

 

 

 

 

 

 

 

 

…which maps very well to the best-known terrestrial method of producing the element.

Incidentally – the equation in the diagram offers the Reader a simple explanation as to why the translation of the Kelan Book has proven so difficult. In the single equation, we see seven [and possibly eight] different scripts for notation, each of which corresponds to an entirely different language or dialect. This is coupled with a set of mathematical operators (the curved and angled markings), has proven a tremendous challenge to overcome.

The pump room is situated on the floor level with the vessels, and control rooms for the pumps and modulator / beam rooms are situated to the left of the beam apparatus, as seen.


The purpose of the pie chart remains unclear, but the research Team has arrived a theory – given the presence of the chart in this diagram, the Team then looked at the dimensional call-out seen just to the left, citing some element (we suspect the length and angle) of the support strut. The energy level and frequency of the red line on the spectral graph, when in taken in the context of the creation of Unubium, infer Beta radiation is being created during the process. With a moderately-short Mean Free Path, Beta emissions could be shielded by the structure walls.

Referring back to Image 1, is can be seen that the beam projectors are angled away from the structure, and the Planar Fields are thus also angled-away from the structure, such that the upper floors of the spire are well-clear of the Fields. Scientifically, there is no reason for the beams to be angled, and the engineering seen here (to angle the beams) definitely would have consumed much additional effort on their part. Because there was no practical scientific reason for this, we must infer the reason was biological. Likewise, in Images 1 and 3, it can be seen that all floors at or below the containment vessels are not fitted-out for long-term Kelan occupation. We thus conjecture that the dimensioning and graphs seen in Image 3 are representing the care taken by the Kelans to ensure none of their citizens would be in long-term proximity to the fields.

Finally – the fact that the areas represented in the pie chart as red, connote the interesting possibility that in Kelan culture, red signified “danger”, as in our culture. We continue to seek other similar inferences from the Kelan Book.